Environment Testing Laboratory

KEY HIGHLIGHTS OF ENVIRONMENTAL SERVICES

Onsite & Real Time Environmental Monitoring

  • Ambient/Indoor/Workzone/Fugitive/Stack/Source Emissions
  • Ambient/Workzone/Occupational/Source Noise
  • Occupational Health and Safety, Industrial Hygiene, Heat Stress & Ventilation Rate
  • Validation of Indoor Environment in Hospitals/ Operation Theaters
  • Calibration of Online Continuous Emission Monitoring Systems (CEMS)

Mobile Environmental Testing Laboratory

Equipped with facility of Online & Real Time Testing for Air, Water, Stack/ Source and Fugitive Emissions to ease
  • Onsite & Real Time Testing
  • Instant and Accurate Data
  • On spot Results for Review and Decision Making
  • Electronic Reporting
  • Nationwide coverage
  • Instrument Systems Tailored to Project needs
  • Customized Quality Program

Aerosol Dust Monitoring (Real Time Dust Monitor – TSI SidePak™ AM520i)

  • Real Time Measurements of Dusts, Fumes, Mists, Smoke and Fog in Ambient & Indoor/ Work Zone Environment
  • Instant Data for PM10, PM5.0, PM2.5, PM1.0 and PM0.8 (Diesel Particulate Matter-DPM)
  • IECEx, ATEX, CSA, and IECEx-SIM Certified Intrinsically Safe for Div. I (Class I: A, B, C, D; Class II: E, F, G & Class III) to Compliance in Volatile Environments containing Flammable Gases, Vapors, Fibers and Dust
  • Quick Evaluation of Worker Exposure to Identify and Remedy Sources of Contaminants & Ability to Make Instant Changes
  • Applicable for Real-Time Sampling in a variety of Workplace Environments as Aerospace, Automotive, Bulk Material Handling, Chemical Manufacturing and Processing, Confined Spaces, Construction Sites, Industry, Foundries, Healthcare, Manufacturing, Mining, Oil and Gas, Petrochemical, Pharmaceutical, Power Generation and Transportation
  • Our Key Clients: Centrient (DSM) Pharmaceuticals, Sunpharma, Hindustan Unilever, Colgate, Dabur, Mahindra
  • Customized Quality Program

CO Measurement (NDIR CO Monitor – Horiba APMA-370)

  • Online and Real Time Measurement of CO in Ambient & Indoor/ Work Zone Environment
  • Approval according to EN 14626: TÜV 936/21204643/B
  • Non-Dispersive Infrared (NDIR) Absorption Technology
  • Cross Flow Modulation Principle for Stable Measurements & Critical Orifice for constant Flow
  • Interference compensating Detector to suppress Moisture influence with Pressure & Temperature compensated Data
  • Measurement Range: 0-100 ppm, Lowest Detection Limit (LDL): 0.02ppm
  • Quick Evaluation of CO Exposures to Identify and Remedy Sources of Contaminants & Ability to Make Instant Changes
  • Applicable for Real-Time Sampling in Workplace Environments, Education and Research Institutions, Energy and Environment, Industrials and Transportation

VOC Emissions Monitoring (VOC Detector – TIGER PhoCheck, Ion Science, UK)

  • Rapid, Accurate, Humidity-resistant VOC Detector with Detection Range: 0-20,000ppm
  • PID Technology widely used and trusted in Major Gas Detection Worldwide
  • Intrinsically Safe ATEX, IECEx and CUL Approvals for Class 1 & Division 1 (Groups A, B, C & D, T4)
  • Measurement of approx. 800 VOCs and Toxic Compounds
  • Applications: VOC detection in Industrial Hygiene, Health and Safety, Sterilization Processes, Environmental Monitoring, Personal Dose Exposures and General Leakage in Fuel Storage
  • Quick Evaluation of VOC Exposure to Identify and Remedy Sources of Contaminants & Ability to Make Instant Changes
  • Applicable for Real-Time Sampling in Workplace Environments as Oil and Gas, Petrochemical, Pharmaceutical, Chemical Manufacturing and Processing, Automotive, Aerospace and Healthcare
  • Our Key Clients: Centrient (DSM) Pharmaceuticals, Mankind Pharmaceuticals and Sunpharma

Noise Dose Monitoring (Noise Dosimeter – SVANTEK SV104IS)

  • Real Time Monitoring of Noise Dose/ Exposure Levels in Work Zone Environment
  • 1/1 Octave Band Real-Time Analysis and Audio Events Recording Functions for Occupational Health And Safety
  • Robust 1/2″ MEMS microphone with range 50-140dBA, auto calibration and TEDS memory
  • intrinsically Safe ATEX and IECEx Certified to Compliance in Volatile Environments containing Flammable Gases, Vapors, Fibers and Dust
  • Meets ISO 9612, OSHA, MSHA, and ACGIH standards
  • Quick Evaluation of Worker Exposure to Identify and Remedy Sources of noise & Ability to Make Instant Changes
  • Applicable for Real-Time Sampling in various Workplace Environments as Aerospace, Automotive, Bulk Material Handling, Chemical Manufacturing and Processing, Construction Sites, Industry, Foundries, Healthcare, Manufacturing, Mining, Oil and Gas, Petrochemical, Pharmaceutical, Power Generation and Transportation

Milk Powder Emission Loss Monitoring in Dairy Industry

  • Quantification of Milk Powder Emission Loss form Milk Dryers
  • Quantification of Fugitive Emission Losses/ General Leakage
  • Our Key Clients:
    • Umang Dairies Ltd (Uttar Pradesh)
    • Verka Dairies Ltd (Punjab)

Validation of Indoor Environment in Hospitals/ Operation Theaters

As per ISO 14664 standard, following test services are delivered
  • Indoor temperature & humidity – Temp. 21±3ºC & RH 20 to 60%
  • Air Change/ Ventilation Rate – Total Air 20 per hour & Fresh Air 4 per hour
  • Air Velocity at outlet of terminal filtration unit /filters (diffuser/ceiling array) @ 25-35 FPM
  • Pressure Differential (∆P) – Positive (≥2.5 Pascal or 0.01 inches of water)
  • Validation of HEPA Filters by DOP (Dispersed Oil Particulate) /POA (Poly Alpha Olefin) testing

Validation/ Calibration of Online CEMS (Emissions/ Effluents)

As per CPCB Guidelines for Continuous Emission Monitoring Systems (July 2017), Calibration Services of CEMS are done as
  • Validation of CEMS for Particulate Matter (PM) by Isokinetic sampling Method
  • Validation of Particulate Matter (PM) in 17 categories of highly polluting industries as Pulp & Paper, Distillery, Sugar, Tanneries, Power Plants, Iron & Steel, Cement, Oil Refineries, Fertilizer, Chloral, Alkali Plants, Dye & Dye Intermediate Units, Pesticides, Zinc, Copper, Aluminum, Petrochemicals,
  • Validation of Particulate Matter (PM) in Common Hazardous Waste Incinerators
  • Validation of Particulate Matter (PM) in Biomedical Waste Incinerators
  • Validation/ Calibration of Online Effluent Monitoring System for pH, BOD, COD & TSS etc.

Ventilation Rate, Health and Safety, Heat Stress Study in Workzone Environment

AAs per the compliance requirements of OSHA/ NIOSH/ Indian Factories Act (1948), following services are available as
  • Occupational Health and Safety in Workzone Area
  • Industrial Hygiene in Workzone Area
  • Heat Stress in Workzone Area
  • Ventilation Rate in Workzone Area

Routine Environmental Monitoring Services

  • Ambient/Indoor/Workzone/Fugitive Emission Monitoring
  • Stack/Source Emissions Monitoring
  • Water & Effluent Water Quality Monitoring
  • DM water for Storage Batteries:- Battery Water Testing as per IS 1069 : 2021
  • Testing of Bio Fertilizer:- Manure, Compost, Vermicompost, Fermented Organic Manure, Fermented Liquid Manure Testing as per FCO 2017
  • Ambient/ Work zone/ Source Noise Quality Monitoring
  • Soil/Sludge/Hazardous Waste Monitoring
  • Dust Fall Rate Measurement
  • Industrial Hygiene, Ventilation Rate, Occupational Health and Safety
  • Validation & Efficiency Testing of Industrial Process/ APCDs
  • Calibration of Online Continuous Emission Monitoring Systems (CEMS)
  • Dioxins and Furans Monitoring for Industrial Plants & Incinerators
  • Chemical Testing for Air, Water, Soil, Sludge, Hazardous Waste & Microbiology

Improve your business profitability and environmental performance.

Ready to get started?
Call Now Button0172-4616225